| After-sales Service: | 2 Years |
|---|---|
| Warranty: | 2 Years |
| Type: | Steel Coil |
| Standard: | ASTM, AISI, GB, JIS, DIN, BS |
| Certification: | ISO, RoHS, IBR |
| Surface Treatment: | Coated |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Main Products | ||
| Steel Flat | Steel Plate | I beam steel |
| Galvanized sheet | Aluminum bar | Aluminum plate |
| Galvanized coil | Tinplate coil | Carbon steel cold rolled sheet |
Tinplate
Tinplate (SPTE), also known as tin-plated iron, is an iron sheet plated with tin on both sides, that is,
a cold-rolled low-carbon thin steel plate, which is rust-proof, corrosion-resistant and non-toxic. Mainly
used to make metal packaging,including canned food, beverages, chemicals, medicine, hygiene, coatings,
paints, sprays,cosmetic bottle caps, etc.
The surface of the aluminized zinc steel plate is characterized by smooth, flat and gorgeous star flowers, and the basic color is silver white. The special coating structure makes it have excellent corrosion resistance. The normal service life of aluminized zinc plate can reach 25A, with good heat resistance. It can be used in high temperature environment of 315 ºC; The coating has good adhesion with the paint film, and has good processing performance, which can be used for stamping, shearing, welding, etc; The surface conductivity is very good.
The application fields are as follows:
Buildings: roofs, walls, garages, soundproof walls, pipes and combined houses, etc;
Automobile: muffler, exhaust pipe, wiper accessories, fuel tank, truck box, etc;
Household appliances: refrigerator backplane, gas stove, air conditioner, electronic microwave oven, LCD frame, CRT explosion-proof belt, LED backlight, electrical cabinet, etc;
Agriculture: pig houses, chicken houses, granaries, greenhouse pipes, etc;
Others: heat insulation cover, heat exchanger, dryer, water heater, etc.
| Thickness | 0.14 - 0.50mm |
| Width | 600 - 1050mm |
| Length | As per customer requirement |
| Steel Type | MR, SPCC |
| Annealing | BA (Batch Annealed), CA (Continuously Annealed) |
| Standard | EN10202, JIS G3303, ASTM A623/ A624/ A625/ A626 |
| Temper | T1, T2, T2.5, T3, T3.5, T4, T5, DR7, DR8, DR8M, DR9, DR9M, DR10 |
| Coating for ETP | Euqally coated (1.1/1.1, 2.0/2.0/ 2.8/2.8/ 5.6/5.6, 8.4/8.4, 11.2/ 11.2) Differetially coated (2.0/1.1, 2.8/1.1, 5.6/1.1, 5.6/2.8, 8.4/2.8, 8.4/5.6, 11.2/2.8, 11.2/5.6, 11.2/8.4, 15.1/5.6) |
| Coating for TFS | Metal Chromium Layer: 50-150mg/m2, Chromium Oxide Layer: 5-35 mg/m2 |
| Delivery time | 5-10 days |
| Supply Capacity | 8,000MT per month |
| Shape | Coil, Sheet |
| Coil ID | 420mm or 508mm |
| Coil Weight | 3-8MT or 6-12MT |
| Bundle Weight | 2MT Max |
| Surface | Bright, Stone, Fine Stone, Sliver, Matt |
| Post treatment | Passivation, Dos Oil |
| Processing service | Cut to sheet, scroll cut, lacquer and print service |
| Application | A. Food Cans (Beverage Cans, Milk Cans, Fruit Cans, Tomato Cans, Edible oil etc. ) B. Industrial Cans (Paint Cans, Chemical Cans, Lube containers) C. General Line Packaging (Aerosol Can, Gift Cans, Cookies Cans, Stationery Box etc.) |
| MOQ | 25MT per size |
| Delivery Tolerance | +/-10% |
| Packing | Standard seaworthy export packing (horizontal or vertical) |
Type of Steel
| MR | It contains few residual minor constituents and has good corrosion resistance. It is widely used for the applications of containers. |
| L | It contains particularly few residual minor constituents as Cu, Ni, Cr, Mn. It is suitable for the materials of containers requiring improved corrosion resistance. |
| D | It is an aluminum killed steel. It is suitable for the applications, that bear deep drawing or other workings which may produce Luder's lines patterns. |
Surface finish
| Product finish | Steel base | Product | Flow-melted | Surface roughness | Remark |
| Ra (μm) | |||||
| Bright | smooth | Tinplate | Yes | ≤ 0.35 | Note 1: Double reduced product is only supplied as stone finish. Note 2: Sub-classfied based on the surface finishing of the blackplate. Note 3: The appearance is governed by: a) the surface characteristics of the steel base which principally result from controlled preparation of the work rolls used during the final stages of temper rolling; b) the mass of the coating applied; and c) whether the tin layer is flow-melted or unflow-melted. |
| Fine stone | fine stone | Tinplate | Yes | 0.25 - 0.45 | |
| Stone | stone | Tinplate | Yes | 0.35 - 0.60 | |
| Silver | shot blast | Tinplate | Yes | ≥ 0.90 | |
| Matt | shot blast | Tinplate | No | Various | |
| Fine stone | fine stone | TFS/ ECCS | - | 0.25 - 0.45 | |
| Stone | stone | TFS/ ECCS | - | 0.35 - 0.60 |
Typical Application
| Remark | Temper Grade | Typical Application | |||
| JIS G3303 | ASTM A623M ASTM A624M ASTM A625M ASTM A626M ASTM A650M |
EN10202 | |||
| Single Reduced (SR) |
T-1 | T49 | TS230 | Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter. | |
| T-2 | T53 | TS245 | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, end for large can. |
||
| T-2.5 | T54 | TS260 | Battery shells, small can ends and bodies | ||
| T-3 | T57 | TS275 | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. | ||
| T-3.5 | T59 | TS290 | General use, pail, 18L, 4L | ||
| T-4 | T61 | TH415 | Can bodies and ends, crown caps, closures. Body and end for small can. |
||
| T-5 | T65 | TH435 | Can ends and bodies requiring intensity. Body and end for small can. |
||
| Double Reduced (DR) |
DR-7M | T71 | TH520 | DRD bodies, dome, Lug cap & 3 piece bodies | |
| DR-8 | T72 | TH550 | DRD bodies, end, Lug cap & 3 piece bodies | ||
| DR-8M | T73 | TH580 | |||
| DR-9 | T75 | TH620 | DRD bodies, Lug cap & 3 piece bodies Thinner guage body, end, DRD cans, caps. |
||
| DR-9M | T76 | - | |||
| DR-10 | - | - | DRD bodies, Lug cap & 3 piece bodies Thinner guage body, end, DRD cans, caps. |
||
Note: Making cans with DR materials, please pay a special attention to the rolling direction.
Coating Weight
1) Tinplate (ETP)
| Item | Former Coating | Coating Weight | Nominal Coating Weight | Minimum average |
| Designation | Code | (g/m2) | (g/m2) | |
| Equally Coated | 10# | 1.1/ 1.1 | 1.1/ 1.1 | 0.9/ 0.9 |
| 20# | 2.2/ 2.2 | 2.2/ 2.2 | 1.8/ 1.8 | |
| 25# | 2.8/ 2.8 | 2.8/ 2.8 | 2.5/ 2.5 | |
| 50# | 5.6/ 5.6 | 5.6/ 5.6 | 5.2/ 5.2 | |
| 75# | 8.4/ 8.4 | 8.4/ 8.4 | 7.8/ 7.8 | |
| 100# | 11.2/ 11.2 | 11.2/ 11.2 | 10.1/ 10.1 | |
| Differentially Coated | 25#/ 10# | 2.8/ 1.1 | 2.8/ 1.1 | 2.5/ 0.9 |
| 50#/ 10# | 5.6/ 1.1 | 5.6/ 1.1 | 5.2/ 0.9 | |
| 50#/ 25# | 5.6/ 2.8 | 5.6/ 2.8 | 5.2/ 2.5 | |
| 75#/ 25# | 8.4/ 2.8 | 8.4/ 2.8 | 7.8/ 2.5 | |
| 75#/ 50# | 8.4/ 5.6 | 8.4/ 5.6 | 7.8/ 5.2 | |
| 100#/ 25# | 11.2/ 2.8 | 11.2/ 2.8 | 10.1/ 2.5 | |
| 100#/ 50# | 11.2/ 5.6 | 11.2/ 5.6 | 10.1/ 5.2 | |
| 100#/ 75# | 11.2/ 8.4 | 11.2/ 8.4 | 10.1/ 7.8 | |
| 125#/ 50# | 15.1/ 5.6 | 15.1/ 5.6 | 13.9/ 5.2 |
| Pickling Lag Value | Iron Solution Value | Tin Crystallite Size | Alloy-Tin Couple | |
| ≤ 10 Sec | ≤ 20µg/3in2 | ≤ 9# | ≤ 0.12µA/3in | |
| Item | Average Coating Weight (mg/m2) | |||
| Metal Chromium Layer (Metal Cr) | 50 - 150 | |||
| Chromium Oxide Layer (Cr - Oxide) | 5 - 35 | |||
Note: Total chromium is the sum of metallic chromium and chromium content of the oxides and hydroxides.
Passivation
| Item | Chromium weight - Min | Chromium weight - Max | ||
| (mg/m2) - Each Side | (mg/m2) - Each Side | |||
| Code 311 | 3.5 | 9.0 | ||
| Code 300 | 1.0 | 3.0 | ||
| Item | Oil Weight | Aim Oil Weight | ||
| (mg/m2) - Each Side | (mg/m2) - Each Side | |||
| Slightly | 1.0 - 3.5 | 2.5 | ||
| Normal | 3.0 - 6.0 | 4.5 | ||
| Medium | 6.0 - 9.0 | 7.5 | ||
| Light Heavy | 7.0 - 11.0 | 8.5 | ||
| Heavy | 10.0 Min | 9.5 | ||
The inner size of container is below:
20ft GP: 5.8m(length)*2.13m(width)*2.18m(height)
Shandong Jintai Metal Products Co., Ltd. is a company with ten years of domestic trade experience and many years of foreign trade experience. And it is an emerging company integrating smelting, processing, domestic trade, foreign trade, import and export.
Specializing in the production of pickled steel sheets, cold rolled steel sheets, galvanized steel sheets, GALVALUME, aZM coating steel sheetS, ppgl, ppgl,corrugated steel sheets and other products. In the long-term development process, the company has established long-term good cooperative partnership with many large domestic companies by virtue of its excellent product quality advantages. We sincerely welcome domestic and foreign customers to visit our company. We are willing to cooperate with friends from all walks of life for mutual benefit and win-win!
1) Source factory
2) Products in stock
3) Complete range, providing one-stop steel procurement
4) Transportation is guaranteed
Q: Are you a manufacturer?
A: Yes, we are a manufacturer, we have our own factory. And we are the China leading galvanized steel coil, galvalume steel coil,PPGI/PPGL etc. We promise that we are exactly the supplier you have been looking for.
Q:Can we visit your factory ?
A:Yes, of course, we welcome you to visit our factory to check our production lines and know more about our capacity, quality.
Q: Do you have quality control system?
A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.
Q: Can you arrange the shipment for us?
A: Yes, we have designated seafreight and railway freight Forwarders with decades of experiences and we can get the best price with earlist vessel and professional services.
Q: How long is your delivery time?
A: Generally it is 7-14 days if we have the exact goods in our stock. If not, it will take around 25-35 days to get goods ready for delivery.
Q: How do you keep long-term business and good relationship ?
A: 1.We keep supplying good quality products and competitive prices to ensure our customers' benefit.
2. We think highly of every single customers of us and value the relationship, we take it not only as business partner, but also as true friends. Will keep the good services and put customers' benefit as high priority.
BEFORE-SALE SERVICE:
1.ISO Verified Outstanding Manufacturer
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}